Publications

Full Articles


Ganju, E., Han, F., Prezzi, M., and Salgado, R., (2020), "Static Capacity of Closed-Ended Pipe Pile Driven in Gravelly Sand", Journal of Geotechnical and Geoenvironmental Engineering, 146(4), 04020008. [pdf]

Ganju, E., Han, F., Prezzi, M., Salgado, R., and Pereira, J. S., (2020), "Quantification of Displacement and Particle Crushing around a Penetrometer Tip", Geoscience Frontiers, 11(2), 389-399. [pdf]

Han, F., Ganju, E., Prezzi, M., Salgado, R., and Zaheer, M., (2020), "Axial Resistance of Open-Ended Pipe Pile Driven in Gravelly Sand", Géotechnique, 70(2), 138-152. [pdf]

Doreau-Malioche, J., Galvis-Castro, A.C., Tovar-Valencia, R.D., Viggiani, G., Combe,G., Prezzi, M. and Salgado, R., (2019), "Characterising Processes at Sand-Pile Interface using Digital Image Analysis and X-ray CT", Géotechnique Letters, 1-9. [pdf]

Galvis-Castro, A.C., Tovar-Valencia, R.D., Salgado, R. and Prezzi, M., (2019), "Compressive and Tensile Shaft Resistance of Nondisplacement Piles in Sand", Journal of Geotechnical and Geoenvironmental Engineering, 145(9), 04019041. [pdf]

Ganju, E., Han, F., Prezzi, M., Salgado, R., and Pereira, J. S., (2019), "Quantification of Displacement and Particle Crushing around a Penetrometer Tip", Geoscience Frontiers, (in press). [pdf]

Han, F., Ganju, E., Prezzi, M., and Salgado, R., (2019), "Closure to ‘Effects of Interface Roughness, Particle Geometry, and Gradation on the Sand–Steel Interface Friction Angle’ by Fei Han, Eshan Ganju, Rodrigo Salgado, and Monica Prezzi", Journal of Geotechnical and Geoenvironmental Engineering, 145(11), 07019017. [pdf]

Han, F., Ganju, E., Prezzi, M., Salgado, R., and Zaheer, M., (2019), "Axial Resistance of Open-ended Pipe Pile Driven in Gravelly Sand", Géotechnique, 1-15. [pdf]

Han, F., Ganju, E., Salgado, R., and Prezzi, M., (2019), "Closure to ‘Effects of Interface Roughness, Particle Geometry, and Gradation on the Sand–Steel Interface Friction Angle’ by Fei Han, Eshan Ganju, Rodrigo Salgado, and Monica Prezzi", Journal of Geotechnical and Geoenvironmental Engineering, (in press). [pdf]

Han, F., Ganju, E., Salgado, R., and Prezzi, M., (2019), "Comparison of the Load Response of Closed-ended and Open-ended Pipe Piles Driven in Gravelly Sand", Acta Geotechnica, 1-19. [pdf]

Han, F., Ganju, E., Salgado, R., and Prezzi, M., (2019), "Comparison of the Load Response of Closed-Ended and Open-Ended Pipe Piles Driven in Gravelly Sand", Acta Geotechnica, 14(6), 1785–1803. [pdf]

Han, F., Salgado, R., Prezzi, M., and Lim, J., (2019), "Axial Resistance of Nondisplacement Pile Groups in Sand", Journal of Geotechnical and Geoenvironmental Engineering, 145(7), 04019027. [pdf]

Sakleshpur, V.A., Prezzi, M., Salgado, R., Siddiki, N.Z. and Choi, Y.S., (2019), "Large-scale Direct Shear Testing of Geogrid-Reinforced Aggregate Base over Weak Subgrade", International Journal of Pavement Engineering, 20(6), 649-658, DOI: 10.1080/10298436.2017.1321419. [pdf]

Galvis-Castro, A.C., Tovar-Valencia, R.D., Salgado, R. and Prezzi, M., (2018), "Effect of Loading Direction on the Shaft Resistance of Jacked Piles in Dense Sand", Géotechnique, 69(1), 16-28. [pdf]

Han, F., Ganju, E., Salgado, R., and Prezzi, M., (2018), "Effects of Interface Roughness, Particle Geometry, and Gradation on the Sand–Steel Interface Friction Angle", Journal of Geotechnical and Geoenvironmental Engineering, 144(12), 04018096. [pdf]

Sakleshpur, V.A., Prezzi, M. and Salgado, R., (2018), "Ground Engineering Using Prefabricated Vertical Drains: A Review", Geotechnical Engineering Journal of the SEAGS & AGSSEA, 49(1), 45-64. [pdf]

Tovar-Valencia, R.D., Galvis-Castro, A.C., Prezzi, M. and Salgado, R., (2018), "Short-Term Setup of Jacked Piles in a Calibration Chamber", Journal of Geotechnical and Geoenvironmental Engineering, 144(12), 04018092. [pdf]

Woo, S.I. and Salgado, R., (2018), "Simulation of Penetration of a Foundation Element in Tresca Soil using the Generalized Interpolation Material Point Method (GIMP)", Computers and Geotechnics, 94, 106-117. [pdf]

Choi, Y.S., Lee, J., Prezzi, M. and Salgado, R., (2017), "Response of Pile Groups Driven in Sand Subjected to Combined Loads", Geotechnical and Geological Engineering, 35(4), 1587-1604. [pdf]

Ganju, E., Prezzi, M. and Salgado, R., (2017), "Algorithm for Generation of Stratigraphic Profiles using Cone Penetration Test Data", Computers and Geotechnics, 90, 73-84. [pdf]

Han, F., Prezzi, M., and Salgado, R., (2017), "Energy-based Solutions for Nondisplacement Piles Subjected to Lateral Loads", International Journal of Geomechanics, 17(11), 04017104. [pdf]

Han, F., Salgado, R., Prezzi, M. and Lim, J., (2017), "Shaft and Base Resistance of Non-displacement Piles in Sand", Computers and Geotechnics, 83, 184-197. [pdf]

Passini, L.B., Schnaid, F. and Salgado, R., (2017), "Experimental Study of Shaft Resistance of Model Piles in Fluidized and Nonfluidized Fine Sand", Journal of Offshore Mechanics and Arctic Engineering, 139(5):052001. [pdf]

Salgado, R., Han, F., and Prezzi, M., (2017), "Axial Resistance of Non-displacement Piles and Pile Groups in Sand", Rivista Italiana di Geotecnica, 51(4), 35-46. [pdf]

Tang, D., Ganju, E., Rahman, S., Li, D., Prezzi, M. and Salgado, R., (2017), "On Modelling the Compressibility of Unsaturated Fine-grained Soils", Soils and Foundations, (in press). [pdf]

Tovar-Valencia, R.D., Galvis-Castro, A., Salgado, R. and Prezzi, M., (2017), "Effect of Surface Roughness on the Shaft Resistance of Displacement Model Piles in Sand", Journal of Geotechnical and Geoenvironmental Engineering, 144(3): 04017120. [pdf]

Dai, G., Salgado, R., Gong, W. and Zhu, M., (2016), "The Effect of Sidewall Roughness on the Shaft Resistance of Rock-Socketed Piles", Acta Geotechnica, DOI: 10.1007/s11440-016-0470-8. [pdf]

Ganju, E., Kim, H., Prezzi, M., Salgado, R. and Siddiki, N. Z., (2016), "Quality Assurance and Quality Control of Subgrade Compaction using the Dynamic Cone Penetrometer", International Journal of Pavement Engineering, DOI: 10.1080/10298436.2016.1227664 . [pdf]

Han, F., Prezzi, M., Salgado, R. and Zaheer, M., (2016), "Axial Resistance of Closed-Ended Steel-Pipe Piles Driven in Multilayered Soil", Journal of Geotechnical and Geoenvironmental Engineering, DOI: 10.1061/(ASCE)GT.1943-5606.0001589. [pdf]

Kim, H., Prezzi, M. and Salgado, R., (2016), "Calibration of Whatman Grade 42 Filter Paper for Soil Suction Measurement", Canadian Journal of Soil Science, 97(2), 93-98. [pdf]

Kim, H., Tang, D., Ganju, E., Prezzi, M. and Salgado, R., (2016), "Experimental Investigation of Matric Suction in Compacted Fine-grained Soils", International Journal of Pavement Engineering, DOI: 10.1080/10298436.2016.1258242. [pdf]

Salgado, R., Zhang, Y., Abou-Jaoude, G., Loukidis, D. and Bisht, V., (2016), "Pile Driving Formulas Based on Pile Wave Equation Analyses", Computers and Geotechnics, 81, 307-321. [pdf]

Tehrani, F., Salgado, R. and Prezzi, M., (2016), "Analysis of Axial Loading of Pile Groups in Multilayered Elastic Soil", International Journal of Geomechanics, 16(2). [pdf]

Tehrani, F.S., Han, F., Salgado, R., Prezzi, M., Tovar, R.D. and Castro, A.G., (2016), "Effect of Surface Roughness on the Shaft Resistance of Non-displacement Piles embedded in Sand", Geotechnique, 1-15. [pdf]

Tehrani, F.S., Prezzi, M. and Salgado, R., (2016), "A Multidirectional Semi-analytical Method for Analysis of Laterally Loaded Pile Groups in Multi-layered Elastic Strata", International Journal for Numerical and Analytical Methods in Geomechanics, DOI: 10.1002/nag.2511. [pdf]

Basu, P., Prezzi, M., Salgado, R. and Chakraborty T., (2015), "Closure to Shaft Resistance and Setup Factors for Piles Jacked in Clay", Journal of Geotechnical and Geoenvironmental Engineering, 141(6). [pdf]

Han, F., Salgado, R., & Prezzi, M., (2015), "Nonlinear analyses of laterally loaded piles–A semi-analytical approach", Computers and Geotechnics, 70, 116-129. [pdf]

Kang, F., Han, S., Salgado, R. and Li, J. , (2015), "System Probabilistic Stability Analysis of Soil Slopes Using Gaussian Process Regression with Latin Hypercube Sampling ", Computers and Geotechnics , 63, 13-25 . [pdf]

Kim, H., Ganju, E., Tang, D., Prezzi, M., and Salgado, R., (2015), "Matric suction measurements of compacted subgrade soils", Road Materials and Pavement Design, 16(2), 358-378. [pdf]

Salgado, R., Loukidis, D., Abou-Jaoude, G. and Zhang, Y., (2015), "The Role of Soil Stiffness Non-linearity in 1D Pile Driving Simulations", Geotechnique, 65(3), 169-187. [pdf]

Seo, H., Prezzi, M. and Salgado, R., (2015), "Closure to Instrumented Static Load Test on Rock-Socketed Micropile", Journal of Geotechnical and Geoenvironmental Engineering, 141(6). [pdf]

Woo, S. I. and Salgado, R. , (2015), "Bounding Surface Modeling of Sand with Consideration of Fabric and Its Evolution During Monotonic Shearing ", International Journal of Solids and Structures , (in press). [pdf]

Arshad, M. I., Tehrani, F. S., Prezzi, M. and Salgado, R. , (2014), "Experimental Study of Cone Penetration in Silica Sand Using Digital Image Correlation ", Geotechnique , 64(7), 551-569 . [pdf]

Balunaini, U., Mohan, V.K.D., Prezzi, M. and Salgado, R., (2014), "Shear Strength of Tyre Chip-Sand and Tyre Shred-Sand Mixtures", Proceedings of ICE-Geotechnical Engineering, 167(6), 585-595. [pdf]

Balunaini, U., Yoon, S., Prezzi, M. and Salgado, R. , (2014), "Pullout Response of Uniaxial Geogrid in Tire Shred-Sand Mixtures ", Geotechnical and Geological Engineering , 32, 505-523 . [pdf]

Basu, D. and Salgado, R., (2014), "Closure to Load and Resistance Factor Design of Drilled Shafts in Sand", Journal of Geotechnical and Geoenvironmental Engineering, 140(3), 07014002. [pdf]

Basu, P., Prezzi, M., Salgado, R. and Chakraborty, T. , (2014), "Shaft Resistance and Setup Factors for Piles Jacked in Clays ", Journal of Geotechnical and Geoenvironmental Engineering , 140(3) . [pdf]

Basu, P., Salgado, R., Chakraborty, T. and Prezzi, M. , (2014), "Closure to Shaft Resistance of Drilled Shafts in Clay ", Journal of Geotechnical and Geoenvironmental Engineering , 140(7) . [pdf]

Choi, Y.S., Basu, D., Prezzi, M. and Salgado, R., (2014), "Study on Laterally Loaded Piles with Rectangular and Circular Cross Sections", Geomechanics and Geoengineering: An International Journal , 10(2), 139-152. [pdf]

Choi, Y.S., Basu, D., Salgado, R. and Prezzi, M. , (2014), "Response of Laterally Loaded Rectangular and Circular Piles in Soils with Properties Varying with Depth ", Journal of Geotechnical and Geoenvironmental Engineering , 140(4) . [pdf]

Salgado, R. and Kim, D. , (2014), "Reliability Analysis of Load and Resistance Factor Design of Slopes ", Journal of Geotechnical and Geoenvironmental Engineering , 140(1), 57-73 . [pdf]

Salgado, R. and Prezzi, M., (2014), "Effect of Penetration Rate on Cone Penetration Resistance", Soils and Rocks, 37(3), 233-242 (invited). [pdf]

Salgado, R., Faraz, T. and Prezzi, M. , (2014), "Analysis of Laterally Loaded Pile Groups in Multilayered Elastic Soil ", Computers and Geotechnics , 62, 136-153 . [pdf]

Woo, S. I. and Salgado, R. , (2014), "Determination of an Image Point on a Surface based on a π Plane-based Algorithm ", Computational Mechanics , 53(5), 1033-1046 . [pdf]

Basu, D., Salgado, R. and Prezzi, M., (2013), "A New Framework for Analysis of Laterally Loaded Piles", Journal of Geo-engineering Sciecnes, 1(1), 53-67. [pdf]

Basu, P., Prezzi, M. and Salgado, R. , (2013), "Modeling of Installation and Quantification of Shaft Resistance of Drilled Displacement Piles in Sand ", International Journal of Geomechanics , ASCE (accepted, invited paper) . [pdf]

Chakraborty, T., Salgado, R. and Loukidis, D. , (2013), "A Two-Surface Plasticity Model for Clay ", Computers and Geotechnics , 49, 170-190 . [pdf]

Chakraborty, T., Salgado, R., Basu, P. and Prezzi, M. , (2013), "Shaft Resistance of Drilled Shafts in Clay ", Journal of Geotechnical and Geoenvironmental Engineering , ASCE, 139(4), 548-563 . [pdf]

Lee, J. T., Prezzi, M. and Salgado, R. , (2013), "Influence of Axial Loads on the Lateral Capacity of Instrumented Steel Model Piles ", International Journal of Pavement Research and Technology , 6(2), 80-85 . [pdf]

Salgado, R., Seo, H. and Prezzi, M. , (2013), "Variational Elastic Solution for Axially Loaded Piles in Multilayered Soil ", International Journal for Numerical and Analytical Methods in Geomechanics , 37(4), 423-440 . [pdf]

Salgado, R., Zhang, Y., Dai, G. and Gong, W. , (2013), "Reply to the Discussion by Fellenius on "Load Tests on Full-Scale Bored Pile Groups" ", Canadian Geotechnical Journal , 50(4), 454-455 . [pdf]

Seo, H., Prezzi, M. and Salgado, R. , (2013), "Instrumented Static Load Test on Rock-Socketed Micropile ", Journal of Geotechnical and Geoenvironmental Engineering , 139(12), 2037-2047 . [pdf]

Basu, D. and Salgado, R. , (2012), "Load and Resistance Factor Design of Drilled Shafts in Sand ", Journal of Geotechnical and Geoenvironmental Engineering , ASCE, 138(12), 1455-1469 . [pdf]

Bica, A., Prezzi, M., Seo, H., Salgado, R. and Kim, D , (2012), "Instrumentation and Axial Load Testing of Displacement Piles ", Proceedings of the ICE (Institution of Civil Engineers) - Geotechnical Engineering , (accepted) . [pdf]

Dai, G., Salgado, R., Gong, W. and Zhang, Y. , (2012), "Load Tests on Full-Scale Bored Pile Groups ", Canadian Geotechnical Journal , 49(11), 1293-1308 . [pdf]

Kim, D. and Salgado, R. , (2012), "Load and Resistance Factors for External Stability Checks of Mechanically Stabilized Earth Walls ", Journal of Geotechnical and Geoenvironmental Engineering , ASCE, 138(3), 241-251 . [pdf]

Kim, D. and Salgado, R. , (2012), "Load and Resistance Factors for Internal Stability Checks of Mechanically Stabilized Earth Walls ", Journal of Geotechnical and Geoenvironmental Engineering , ASCE, 138(8), 910-921 . [pdf]

Loukidis, D. and Salgado, R., (2012), "Active Pressure on Gravity Walls Supporting Purely Frictional Soils", Canadian Geotechnical Journal, 49(1), 78-97. [pdf]

Zhao, X., Salgado, R. and Prezzi, M. , (2012), "Centrifuge Modeling of Combined Anchors for Slope Stability ", Proceedings of the ICE (Institution of Civil Engineers) - Geotechnical Engineering , 167(GE4), 357-370 . [pdf]

Basu, P., Loukidis, D., Prezzi, M. and Salgado, R., (2011), "Analysis of Shaft Resistance of Jacked Piles in Sands", International Journal for Numerical and Analytical Methods in Geomechanics, 35(15), 1605-1635. [pdf]

Lee, J., Prezzi, M. and Salgado, R., (2011), "Experimental Investigation of the Combined Load Response of Model Piles Driven in Sand", Geotechnical Testing Journal, ASTM, 34(6), 653-667. [pdf]

Loukidis, D. and Salgado, R. , (2011), "Effect of Relative Density and Stress Level on the Bearing Capacity of Footings on Sand ", Geotechnique , ICE, 61(2), 107-119 . [pdf]

Salgado, R., Kim, D., Prezzi, M., Bica, A.V.D. and Lee, W., (2011), "Closure to "Load Testing of a Closed-Ended Pipe Pile Driven in Multilayered Soil" by Kim, D., Bica, A.V.D., Salgado, R., Prezzi, M., and Lee, W.", Journal of Geotechnical and Geoenvironmental Engineering, 137(10), 986-988. [pdf]

Chakraborty, T. and Salgado, R., (2010), "Dilatancy and Shear Strength of Sand at Low Confining Pressures", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 136(3), 527-532. [pdf]

Lee, W., Kim, D., Salgado, R. and Zaheer, M., (2010), "Setup of Driven Piles in Layered Soil", Soils and Foundations, JGS, 50(5), 585-598. [pdf]

Zhang, J. and Salgado, R., (2010), "Stress-Dilatancy Relation for Mohr-Coulomb Soils Following a Non-Associated Flow Rule", Geotechnique, ICE, 60(3), 223–226. [pdf]

Basu, D., Salgado, R. and Prezzi, M., (2009), "A Continuum-Based Model for Analysis of Laterally Loaded Piles in Layered Soils", Geotechnique, ICE, 59(2), 127-140. [pdf]

Carraro, J.A.H., Prezzi, M. and Salgado, R., (2009), "Shear Strength and Stiffness of Sands Containing Plastic or Nonplastic Fines", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(9), 1167-1178. [pdf]

Foye, K.C., Abou-Jaoude, G., Prezzi, M. and Salgado, R., (2009), "Resistance Factors for Use in Load and Resistance Factor Design of Driven Pipe Piles in Sands", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(1), 1-13. [pdf]

Kim, D., Bica, A.V.D., Salgado, R., Prezzi, M. and Lee, W., (2009), "Load Testing of a Closed-Ended Pipe Pile Driven in Multilayered Soil", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(4), 463-473. [pdf]

Loukidis, D. and Salgado, R., (2009), "Bearing Capacity of Strip and Circular Footings in Sand Using Finite Elements", Computers and Geotechnics, Elsevier, 36(5), 871-879. [pdf]

Loukidis, D. and Salgado, R., (2009), "Modeling Sand Response Using Two-Surface Plasticity", Computers and Geotechnics, Elsevier, 36(1-2), 166-186. [pdf]

Seo, H., Basu, D., Prezzi, M. and Salgado, R., (2009), "Load-Settlement Response of Rectangular and Circular Piles in Multilayered Soils", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(3), 420-430. [pdf]

Basu, D. and Salgado, R., (2008), "Analysis of Laterally Loaded Piles with Rectangular Cross Sections Embedded in Layered Soil", International Journal for Numerical and Analytical Methods in Geomechanics, Wiley, 32(7), 721-744. [pdf]

Basu, D., Prezz, M., Salgado, R. and Chakraborty, T. , (2008), "Settlement Analysis of Piles with Rectangular Cross Sections in Multi-Layered Soils", Computers and Geotechnics, Elsevier, 35(4), 563-575. [pdf]

Kim, K., Prezzi, M., Salgado, R. and Lee, W., (2008), "Effect of Penetration Rate on Cone Penetration Resistance in Saturated Clayey Soils", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 134(8), 1142-1153. [pdf]

Lee, J., Eun, J., Prezzi, M. and Salgado, R., (2008), "Strain Influence Diagrams for Settlement estimation of both Isolated and Multiple Footings in Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 134(4), 417-427. [pdf]

Loukidis, D. and Salgado, R., (2008), "Analysis of the Shaft Resistance of Non-Displacement Piles in Sand", Geotechnique, ICE, 58(4), 283-296. [pdf]

Loukidis, D., Chakraborty, T. and Salgado, R., (2008), "Bearing Capacity of Strip Footings on Purely Frictional Soil under Eccentric and Inclined Loads", Canadian Geotechnical Journal, NRC Research Press, 45(6), 768-787. [pdf]

Lyamin, A.V., Salgado, R., Sloan, A.W. and Prezzi, M., (2008), "Two- and Three-Dimensional Bearing Capacity of Footings in Sand - Discussion", Geotechnique, 58(7), 609-610. [pdf]

Salgado, R., Houlsby, G. T. and Cathie, D.N., (2008), "Contributions to Geotechnique 1948 to 2008: Foundation Engineering - Invited paper to the 60th Anniversary issue of Geotechnique", Geotechnique, ICE, 58(5), 369-375. [pdf]

Basu, D. and Salgado, R., (2007), "Elastic analysis of laterally loaded piles in multi-layered soil", Geomechanics and Geoengineering: An International Journal, Taylor & Francis Group, 2(3), 183-196. [pdf]

Basu, D. and Salgado, R., (2007), "Method of Initial Parameters for Laterally Loaded Piles Embedded in Layered Soils", Geomechanics and Geoengineering: An International Journal, Taylor & Francis Group, 2(4), 281-294. [pdf]

Kim, B., Prezzi, M. and Salgado, R., (2007), "Closure to Geotechnical Properties of Fly and Bottom Ash Mixtures for Use in Highway Embankments", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 133(7), 903-904. [pdf]

Lyamin, A.V., Salgado, R., Sloan, S. W. and Prezzi, M., (2007), "Two- and Three-Dimensional Bearing Capacity of Footings in Sand", Geotechnique, ICE, 57(8), 647-662. [pdf]

Murthy, T.G., Loukidis, D., Carraro, J.A.H., Prezzi, M. and Salgado, R., (2007), "Undrained Monotonic Response of Clean and Silty Sands", Geotechnique, ICE, 57(3), 273-288. [pdf]

Salgado, R. and Prezzi, M., (2007), "Computation of Cavity Expansion Pressure and Penetration Resistance in Sands", International Journal of Geomechanics, ASCE, 7(4), 251-265. [pdf]

Foye, K.C., Salgado, R. and Scott, B. , (2006), "Assessment of Variable Uncertainties for Reliability-Based Design of Foundations", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(9), 1197-1207. [pdf]

Foye, K.C., Salgado, R. and Scott, B., (2006), "Resistance Factors for Use in Shallow Foundation LRFD", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(9), 1208-1218. [pdf]

Lee, J. and Salgado, R., (2006), "Closure to Estimation of Bearing Capacity of Circular Footings on Sands based on Cone Penetration Test", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(11), 1515-1518. [pdf]

Kim, B., Prezzi, M. and Salgado, R., (2005), "Geotechnical Properties of Fly and Bottom Ash Mixtures for Use in Highway Embankments", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 131(7), 914-924. [pdf]

Kim, D., Salgado, R. and Altschaeffl, A.G., (2005), "Effects of Supersingle Tire Loadings on Pavements", Journal of Transportation Engineering, ASCE, 131(10), 732-743. [pdf]

Lee, J. and Salgado, R., (2005), "Estimation of Bearing Capacity of Circular Footings on Sands based on Cone Penetration Test", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 131(4), 442-452. [pdf]

Lee, J., Salgado, R. and Kim, S., (2005), "Bearing Capacity of Circular Footings under Surcharge using State-Dependent Finite Element Analysis", Computers and Geotechnics, Elsevier, 32(6), 445-457. [pdf]

Paik, K.H. and Salgado, R., (2005), "Erratum: Estimation of Active Earth Pressure against Rigid Retaining Walls Considering Arching Effects", Geotechnique, 55(4), 342. [pdf]

Lee, J., Salgado, R. and Carraro, J.A.H., (2004), "Stiffness Degradation and Shear Strength of Silty Sands", Canadian Geotechnical Journal, NRC Research Press, 41(5), 831-843. [pdf]

Lee, Woojin, Lee, Won-Je, Lee, Sang-Bae and Salgado, R. , (2004), "Measurement of Pile Load Transfer using Fiber Bragg Grating Sensor System", Canadian Geotechnical Journal, NRC Research Press, 41(6), 1222-1232. [pdf]

Paik, K. and Salgado, R., (2004), "Closure to Determination of Bearing Capacity of Open-Ended Piles in Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 130(6), 658-660. [pdf]

Paik, K. and Salgado, R., (2004), "Effect of Pile Installation Method on Pipe Pile Behavior in Sands", Geotechnical Testing Journal, ASTM, 27(1), 78-88. [pdf]

Salgado, R. and Prezzi, M., (2004), "Briefing: Construction of a tyre-shreds test embankment", Engineering Sustainability Journal, Proceedings of the Institution of Civil Engineers, 157(ES2), 65-66. [pdf]

Salgado, R., Lyamin, A.V., Sloan, S.W. and Yu, H.S., (2004), "Two- and Three-dimensional Bearing Capacity of Foundations in Clay", Geotechnique, ICE, 54(5), 297-306. [pdf]

Siddiki, N.Z., Kim, D. and Salgado, R., (2004), "Use of Recycled and Waste Materials in Indiana", Journal of the Transportation Research Board, TRB, 1874(December), 78-85. [pdf]

Carraro, J.A.H., Bandini, P. and Salgado, R., (2003), "Liquefaction Resistance of Clean and Nonplastic Silty Sands Based on Cone Penetration Resistance", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(11), 965-976. [pdf]

Lee, J., Salgado, R. and Paik, K., (2003), "Estimation of Load Capacity of Pipe Piles in Sand Based on Cone Penetration Test Results", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(5), 391-403. [pdf]

Loukidis, D., Bandini, P. and Salgado, R. , (2003), "Stability of Seismically Loaded Slopes using Limit Analysis", Geotechnique, ICE, 53(5), 463-479. [pdf]

Paik, K. and Salgado, R., (2003), "Determination of Bearing Capacity of Open-Ended Piles in Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(1), 46-57. [pdf]

Paik, K., Salgado, R. Lee, J and Kim, B. , (2003), "Behavior of Open- and Closed-ended Piles Driven into Sands", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(4), 296-306. [pdf]

Paik, K.H. and Salgado, R., (2003), "Estimation of Active Earth Pressure Against Rigid Retaining Walls Considering Arching Effects", Geotechnique, ICE, 53(7), 643-653 . [pdf]

Scott, B., Kim, B. and Salgado, R., (2003), "Assessment of Current Load Factors for Use in Geotechnical Load and Resistance Factor Design", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(4), 287-295. [pdf]

Kim, J., Salgado, R. and Lee, J., (2002), "Stability Analysis of Complex Soil Slopes using Limit Analysis ", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 128(7), 546-557. [pdf]

Lee , K., Cho, J., Salgado, R., Jeon, W. and Kim, N., (2002), "Engineering Properties of Wastewater Treatment Sludge Modified by Hydrated Lime and Fly Ash", Journal of Solid Waste Technology and Management, Widener University, 28(3), 145-153. [pdf]

Lee , K., Yoon, Y., Cho, J., Salgado, R., Lee, I. , and Kim, N., (2002), "Engineering Properties of Waste Foundry Sand Mixtures as Controlled Low Strength Materials", Journal of Solid Waste Technology and Management, Widener University, 28(4), 190-199. [pdf]

Lee, J. and Salgado, R. , (2002), "Estimation of Footing Settlement in Sand", International Journal of Geomechanics, ASCE, 2(1), 1-28. [pdf]

Lee, J.H., Karim, A., Salgado, R., and Lovell, C.W., (2001), "Compaction and Ompaction and Shear Strength of Fly and Bottom Ash Mixtures", Journal of Solid Waste Technology and Management, Widener University, 27(3), 137-145. [pdf]

Lee, K., Cho, J., Salgado, R. and Lee, I., (2001), "Retaining Wall Model Test with Foundry Sand Mixture Backfill", Geotechnical Testing Journal, ASTM, 24(4), 401-408. [pdf]

Salgado, R. and Randolph, M.F. , (2001), "Analysis of Cavity Expansion in Sand", International Journal of Geomechanics, ASCE, 1(2), 175-192. [pdf]

Salgado, R., Mitchell, J.K., and Jamiolkowski, M., (2001), "Closure to Calibration Chamber Size Effects on Penetration Resistance in Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 127(7), 629-630. [pdf]

Lee, J. and Salgado, R., (2000), "Analysis of Calibration Chamber Plate Load Tests", Canadian Geotechnical Journal, NRC Research Press, 37(1), 14-25. [pdf]

Salgado, R., Bandini, P. and Karim, A., (2000), "Shear Strength and Stiffness of Silty Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 126(5), 451-462. [pdf]

Kim, J., Salgado, R. and Yu, H.S., (1999), "Limit Analysis of Soil Slopes Subjected to Pore-Water Pressures", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(1), 49-58. [pdf]

Lee, J.H. and Salgado, R., (1999), "Determination of Pile Base Resistance in Sands", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(8), 673-683. [pdf]

Lee, J.H., Salgado, R., Bernal , A., and Lovell, C.W., (1999), "Shredded Tires and Rubber-Sand as Lightweight Backfill", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(2), 132-141. [pdf]

Yu, H.S., Salgado, R., Sloan, S. and Kim, J., (1999), "Closure to Limit Analysis versus Limit Equilibrium for Slope Stability", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(10), 915-918. [pdf]

Salgado, R., Jamiolkowski, M. and Mitchell, J.K., (1998), "Penetration Resistance in Sands: Analysis and Applications to Liquefaction Potential Assessment and Estimation of Pile Base Resistance", Rivista Italiana di Geotecnica, AGI, XXXII(4), 5-17. [pdf]

Salgado, R., Mitchell, J.K., and Jamiolkowski, M., (1998), "Calibration Chamber Size Effects on Penetration Resistance in Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 124(9), 878-888. [pdf]

Yu, H.S., Salgado, R., Sloan, S.W. and Kim, J.M., (1998), "Limit Analysis versus Limit Equilibrium for Slope Stability", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 124(1), 1-11. [pdf]

Bernal , A., Salgado, R., Swan, R.H., Jr. and Lovell, C.W., (1997), "Interaction Between Tire Shreds, Rubber-Sand and Geosynthetics", Geosynthetics International, ICE, 4(6), 623-643. [pdf]

Park, T., Lee , K., Salgado, R., Lovell, C.W. and Coree, B.J., (1997), "Use of Pyrolized Carbon Black as Additive in Hot Mix Asphalt", Journal of Transportation Engineering, ASCE, 123(6), 489-494. [pdf]

Salgado, R., Boulanger, R.W. and Mitchell, J.K., (1997), "Lateral Stress Effects on CPT Liquefaction Resistance Correlations", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(8), 726-735. [pdf]

Salgado, R., Drnevich, V.P., Ashmawy, A., Grant, W.P., and Vallenas, P., (1997), "Interpretation of Large-Strain Seismic Cross-Hole Tests", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4), 382-388. [pdf]

Salgado, R., Mitchell, J.K., and Jamiolkowski, M., (1997), "Cavity Expansion and Penetration Resistance in Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4), 344-354. [pdf]

Sitar, N. and Salgado, R., (1994), "Behavior of Young Bay Mud from the Marina District of San Francisco Under Static and Cyclic Simple Shear", Loma Prieta Professional Paper 1551- A, U.S. Geological Survey, A145-A153. [pdf]

Fretti, C., Lo Presti, D., and Salgado, R., (1993), "The Research Dilatometer: In-situ and Calibration Chamber Test Results", Rivista Italiana di Geotecnica, AGI, XXVI(4), 237-243. [pdf]


Proceedings


Ganju, E., Han, F., Castro, A., Prezzi, M., and Salgado, R., (2020), "Experimental Study of Crushing in Cone Penetration Test in Silica Sand", Geo-Congress 2020, American Society of Civil Engineers, Reston, VA, 132–141.

Han, F., Ganju, E., Salgado, R., and Prezzi, M., (2020), "Static Load Test on Open-Ended Pipe Pile Using Double-Wall Instrumentation", Geo-Congress 2020, American Society of Civil Engineers, Reston, VA, 73–81.

Sakleshpur, V.A., Lee, M.S., Prezzi, M., Salgado, R. and Siddiki, N.Z., (2020), "Effects of Geogrid Aperture Size and Junction Strength on Soil-Aggregate Interface Shear Strength", GeoAmericas 2020: 4th Pan American Conference on Geosynthetics, Rio de Janeiro, Brazil, Paper No. 86-1.

Han, F., Bisht, V., Prezzi, M., and Salgado, R., (2019), "Validation of Pile Design Methods for Closed-ended Driven Pipe Piles", Geo-Congress 2019, American Society of Civil Engineers, Reston, VA, 98–110.

Han, F., Prezzi, M., and Salgado, R., (2018), "Static and Dynamic Pile Load Tests on Closed-ended Driven Pipe Pile", International Foundations Congress and Equipment Exposition (IFCEE 2018), American Society of Civil Engineers, Reston, VA, 496–506.

Han, F., Salgado, R., and Prezzi, M., (2018), "Numerical and Experimental Study of Axially Loaded Non-displacement Piles in Sand", International Conference on Deep Foundations and Ground Improvement, Hawthorne, NJ: Deep Foundations Institute, 221–229.

Han, F., Salgado, R., and Prezzi, M., (2017), "A Semi-analytical Method for Analysis of Laterally Loaded Piles in Elasto-plastic Soil", Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering, Seoul, South Korea, 2771–2774.

Tehrani, F. S., Han, F., Salgado, R., and Prezzi, M., (2017), "Laboratory Study of the Effect of Pile Surface Roughness on the Response of Soil and Non-displacement Piles", Geotechnical Frontiers 2017, American Society of Civil Engineers, Reston, VA, 256–264.

Basu, D. and Salgado, R., (2015), "Development of Resistance Factors for Drilled Shafts in Sand", XVI European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE) 2015, Sep. 13-17, EICC, Edinburgh, Scotland.

Basu, D., Salgado, R. and Prezzi, M., (2014), "A Framework for Analysis of Piles with Rectangular Cross Section", Geo-Congress 2014, 558-569.

Basu, P, Prezzi, M. and Salgado, R., (2014), "Recent Advances in Calculation of Shaft Resistance of Drilled-Displacement Piles", Geo-Congress 2014, 1771-1780.

Basu, P., Loukidis, D., Prezzi, M. and Salgado, R., (2014), "The Mechanics of Friction Fatigue in Jacked Piles Installed in Sand", Geo-Congress 2014, 546-557.

Salgado, R., (2014), "Experimental Research on Cone Penetration Resistance", Geo-Congress 2014 Keynote Lectures, 140.

Seo, H., Prezzi, M. and Salgado, R., (2014), "Instrumented Static Load Test on Micropile Socketed into Limestone", Geo-Congress 2014 Technical Papers, 572-581.

Tehrani, F., Arshad, M., Prezzi, M. and Salgado, R., (2014), "Visualization of Active Mode of Failure behind Flexible Walls under Pure Rotation Using Digital Image Correlation", Geo-Congress 2014 Technical Papers, 3393-3402.

Umashankar, B., Prezzi, M. and Salgado, R., (2014), "Pullout Resistance Factors of Metal Strips in Tire Shred-Sand Mixtures", Geo-Shanghai 2014 Geoenvironmental Engineering, 232-241.

Loukidis, D. and Salgado, R. , (2013), "Active Earth Thrust on Walls Supporting Granular Soils: Effect of Wall Movement", Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris.

Salgado, R. , (2013), "The Mechanics of Cone Penetration: Contributions from Experimental and Theoretical Studies", Geotechnical and Geophysical Site Characterization 4, ISC 4, Vol. 1, 131-153, CRC Press (Keynote paper).

Salgado, R., Basu, D., Prezzi, M., and Tehrani, F. , (2013), "Continuum-Based Analysis of Laterally Loaded Piles", Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris.

Salgado, R., Lyamin, A. and Lim, J. , (2013), "Foundation Failure Case Histories Reexamined using Modern Geomechanics", 7th International Conference on Case Histories in Geotechnical Engineering , (Keynote (SOAP) paper).

Salgado, R., Prezzi, M., Kim, K. and Lee, W. , (2013), "Penetration Rate Effects on Cone Resistance Measured in a Calibration Chamber", Geotechnical and Geophysical Site Characterization 4, ISC 4, Vol. 1, 1025-1030, CRC Press.

Zhang, Y., Salgado, R., Dai, G. and Gong, W. , (2013), "Load Tests on Full-Scale Bored Pile Groups", Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris.

Kim, D. and Salgado, R., (2012), "Resistance Factors for MSE Wall Sliding and Overturning Checks", Geo-Congress, Oakland, 395-404.

Salgado, R., (2012), "Modern Trends in the Analysis of Foundations", Modern Trends in Geomechanics, Nottingham (Invited paper).

Tehrani, F., Prezzi, M., Salgado, R. , (2012), "Geotechnical Properties of Recyclable Materials Used in Road Construction in Indiana", Proc., 17th Annual Great Lakes Geotechnical/Geoenvironmental Conference, Cleveland, OH, May 24, 2012, CD-ROM.

Basu, D. and Salgado, R., (2011), "Elastic Analysis of Laterally Loaded Rectangular Piles", GeoFlorida, Geotechnical Special Publication (211 GSP), 132-141.

Basu, P., Loukidis, D., Prezzi, M. and Salgado, R., (2011), "Numerical Simulation of Shaft Resistance Development for Piles Jacked in Sand", 13th International Conference of the International Association for Computer Methods and Advanced in Geomechanics (IACMAG), Melbourne, Australia, May, Volume 2, pp. 905-912.

Basu, P., Salgado, R., and Prezzi, M., (2011), "A New Model for Analysis of Laterally Loaded Piles", GeoFrontiers, Dallas, TX, March, 8pp, 122-131.

Foye, K., Prezzi, M. and Salgado, R, (2011), "Resistance Factors for Design of Piles in Sand: Tools to Understand Design Reliability", 3rd International Symposium on Geotechnical Safety and Risk, Munich, Germany.

Foye, K., Prezzi, M., and Salgado, R., (2011), "Developing Resistance Factors for Design of Piles in Sand", GI-ASCE GeoRisk, Atlanta, GA, June 26-28, 8pp, 444-451.

Salgado, R. and Woo, S. I., (2011), "Soil Property-Based Methods for Nondisplacement Pile Design", 14th Pan American Conference of Soil Mechanics and Foundation Engineering, Oct. 2-6, Toronto, Canada, 8pp.

Salgado, R. Prezzi, M. and Tehrani, F., (2011), "Load and Resistance Factor Design for Axially Loaded Drilled Shafts", 14th Pan American Conference of Soil Mechanics and Foundation Engineering, Oct. 2-6, Toronto, Canada, 8pp.

Seo, H., Prezzi, M. and Salgado, R., (2011), "Elastic Analysis for Axially Loaded Piles in Multi-layered Soil", 13th International Conference of the International Association for Computer Methods and Advanced in Geomechanics (IACMAG), Melbourne, Australia, May, Volume 2, pp. 984-990.

Basu, D., Salgado, R. and Prezzi, M., (2010), "A New Model for Analysis of Laterally Loaded Piles", GeoFlorida, West Palm Beach, FL, February.

Kim, K., Prezzi, M., Salgado, R. and Lee, W., (2010), "Penetration Rate Effects on Cone Resistance Measured in a Calibration Chamber", 2nd International Symposium on Cone Penetration Testing, Huntington Beach, CA, May, Vol. 2, Paper No. 2-03, 8pp.

Lee, J., Eun, J., Prezzi, M. and Salgado, R., (2010), "Settlement Estimation of Multiple Footings", 2nd International Symposium on Cone Penetration Testing, Huntington Beach, CA, May.

Loukidis, D. & Salgado, R., (2010), "Equivalent Friction Angle in Bearing Capacity Calculations for Footings on Granular Soils", Proceedings of the Vardoulakis mini-symposia, 9th HSTAM International Congress on Mechanics, Limassol, Cyprus, 285-292.

Murthy, T. G., Prezzi, M., Salgado, R. and Loukidis, D., (2010), "Undrained response of clean and silty sands", 5th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, CA, Paper No. 1.15b, 8pp.

Salgado, R., (2010), "The Axial Resistance of Nondisplacement Piles (invited paper).", GeoFlorida, GSP 198 (Eds: Mohamad H. Hussein; J. Brian Anderson; and William M. Camp), 584-604 (invited paper)..

Chakraborty, T. and Salgado, R., (2009), "Dilatancy of Sand at Very Low Confining Stresses", 17th ICSMGE, CD-Rom, Alexandria, Egypt, CD-ROM, 652-655.

Salgado, R and Prezzi, M. , (2009), "A Novel Method of Analysis of Laterally Loaded Piles", Proceedings of 2009 NSF Engineering Research and Innovation Conference, Honolulu, Hawaii, June, 8pp.

Salgado, R. and Basu, D., (2009), "Application of the Method of Initial Parameters to the Laterally Loaded Pile Problem", 17th ICSMGE, Alexandria, Egypt, CD-ROM, pp.1297-1300.

Zhang, J. and Salgado, R. , (2009), "A stress-dilatancy relation for cemented sands", Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering: The Academia and Practice of Geotechnical Engineering 1, 510-513.

Basu, D. and Salgado, R., (2008), "An Alternative Method for Determining Ground Strains for Soil-Structure Interaction Problems", Geo-Congress, CD-ROM, Geotechnical Special Publication (179), 133-140.

Basu, D. and Salgado, R., (2008), "Method of Initial Parameters for Laterallyl Loaded Piles", 12th International Conference of the International Association for Computer Methods and Advances in Geomechanics, Goa, India, October 1-6, 3335-3343.

Foye, K.C. and Salgado, R. , (2008), "Probabilistic Development of Load and Resistance Factor Design for Driven Pipe Piles in Sands: Lessons Learned", 33rd Annual Conference on Deep Foundations and 11th International Conference on Deep Foundations, New York City.

Loukidis, D. and Salgado, R. , (2008), "Numerical Study of Limit Shaft Resistance of Bored Piles in Sand", Proceedings of the 12th International Conference of IACMAG, Goa, India, October 1-6, 3376-3383.

Salgado, R., (2008), "Analysis of Single Piles: Challenges and Solutions", 12th International Conference of the International Association for Computer Methods and Advances in Geomechanics, Goa, India, October 1-6, 3117-3126.

Salgado, R., Basu, D., Gavin, K., Kumar, S., Alvarez, G.M.E. and Ahmad, S. F., (2008), "Analysis, Design, Testing and Performance of Foundations", 6th International Conference on Case Histories in Geotechnical Engineering, Arlington, VA, August, General Report for Session 1.

Seo, H., Prezzi, M. and Salgado, R., (2008), "Settlement Analysis of Axially Loaded Piles", 6th International Conference on Case Histories in Geotechnical Engineering, Arlington, VA, August.

Salgado, R., Prezzi, M. and Seo, H., (2007), "Advanced Modeling Tools for the Analysis of Axially Loaded Piles", International Workshop on Pile Foundation Analysis and Design, The Japanese Geotechnical Society, Tokyo, Japan, Keynote paper and lecture, 49-67.

Lee, J. H. and Salgado, R., (2006), "Application of CPT cone resistance for footing bearing capacity estimation", Proc. of GeoShanghai International Conference, Shanghai, China, Geotechnical Special Publication (149), 230-235.

Lee, Woojin, Lee, Won-Je, and Salgado, R., (2006), "An Application of Fiber Bragg Grating Sensor to Piles", Geo-Congress, Atlanta, GA, 32.

Salgado, R., (2006), "Analysis of the Axial Response of Non-Displacement Piles in Sand", Proc. of the 2nd Japan-U.S. Workshop, Geotechnical Special Publication, ASCE, Geomechanics II: Testing, Modeling and Simulation, No. 156, 427-439.

Salgado, R., (2006), "The Role of Analysis in Pile Design", In Modern Trends in Geomechanics, Springer Proc. in Physics, Vol. 106, 521-540.

Bandini, P., Loukidis, D. and Salgado, R., (2005), "Limit Analysis of Seismically Loaded Slopes", 16th International Conference of the IACMAG (Int. Assoc. of Computer Methods and Advances in Geomechanics), Torino, Italy, June.

Basu, D., Salgado, R., Prezzi, M., Lee, J.H., and Paik, K., (2005), "Recent Advances in the Design of Axially-Loaded Piles in Sandy Soils", Geo-Frontiers, Austin, TX, 1-13.

Foye, K. C. and R. Salgado, (2005), "Soil Characterization for Consistent Reliability in the Load and Resistance Factor Design of Pile Foundations", International Symposium on Frontiers in Offshore Geotechnics, Perth, Western Australia, Australia, 807-813.

J. A. H. Carraro, P. Bandini, R. Salgado, (2005), "Liquefaction Resistance of Clean and Silty Sands from Cone Penetration", Geo-Frontiers 2005 Conference (Geo-Institute of the ASCE), Austin, TX, January, Geotechnical Special Publication No. 133, 1337-1351.

Kim, B. J., Prezzi, M., Salgado, R., Lee, J. H., (2005), "Mechanical Properties of Class F Fly and Bottom Ash Mixtures for Embankment Applications", Proc. of IGC 2005, Geotechnical Practices for Environmental Management, Disaster Mitigation and Foundation Engineering, Ahmedabad, India, December, 239-242.

Loukidis, D., Bandini, P., Salgado, R., (2005), "Critical Seismic Coefficient using Limit Analysis and Finite Elements", 11th International Conference on Soil Mechanics and Geotechnical Engineering (ISMGE), Osaka, Japan, September, 2685-2688.

Lee, J. H., Salgado, R., and Paik, K. H., (2004), "CPT-based Load Capacity of Closed- and Open-ended Pipe Piles", International Site Characterization, ICS 2, Porto , Portugal, September, Vol. 2, 1499-1505.

Paik, K., Salgado, R. and Lee, J., (2004), "Design Lessons from Load Tests on Open- and Closed-Ended Pipe Piles", 5th International Conference on Case Histories in Geotechnical Engineering, New York, NY, April, Paper No. 1.11.

Lee, J.H., Salgado, R., Prezzi, M. and Paik, K., (2003), "Instrumented Load Tests on Closed- and Open-Ended Piles", Deep Foundations Institute 28 th Annual Conference on Deep Foundations, Miami, FL, October, 233-242.

Lee, J. H. and Salgado, R., (2002), "Mechanical properties of fly and bottom ash mixtures for embankment application", International Workshop on Light-Weight Geomaterials (IW-LGM2001), Tokyo, Japan, March, 83-89.

Bandini , P., Salgado, R., and Harb, J. A., (2001), "Análise Limite para Taludes com Perfis Complexos de Solos", Conferência Brasileira sobre Estabilidade de Encostas, III COBRAE, Rio de Janeiro, Brazil, Vol. 1, 3rd Session Analise de Estabilidade, 397-402.

Lee , K., Cho, J., Salgado, R., Lee, I. and Kim, N., (2001), "Retaining Wall Model Test with Waste Foundry Sand Mixture as Controlled Low Strength Materials", 17th International Conference on Solid Waste Technology and Management, Philadelphia, PA, October 21-24, Section 3B Waste Materials in Construction, 204-210.

Lee, J. H. and Salgado, R., (2001), "Non-linear Finite Element Analysis of Calibration Chamber Plate Load Tests for Sands", 10 th International Conference on Computer Methods and Advances in Geomechanics, Tucson, January, Balkema, 941-946.

Loukidis, D., Salgado, R. and Bobet, A., (2001), "Seismic Design of Pile Foundations in Southern Indiana", 4th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, CA, March, CD-ROM, Paper No. 8-09, 6 pages.

Lee , J. H. and Salgado, R., (2000), "Application of Shredded Tires as Lightweight Backfill", International Symposium on Coastal Geotechnical Engineering in Practice, Yokohama, Japan, September 20-22, Vol. 1, 623-628.

Lee, J. and Salgado, R., (1999), "Pre-Failure Loading Response of Foundations on Sand", 2nd International Symposium on Pre-Failure Deformation Characterization of Geomaterials, Turin, Italy, September 28-30, Vol. 1, 667-674.

Bandini, P. and Salgado, R., (1998), "Methods of Pile Design based on CPT and SPT Results", 1st International Conference on Site Characterization, Atlanta, GA, April, Vol. 2, 967-976.

Karim , A., Lovell, C.W., and Salgado, R., (1998), "Mixtures of Coal Combustion Ashes for Highway Embankments", 4th Symposium on Environmental Geotechnics and Global Sustainable Development, Boston, MA, August, 431-440.

Bernal , A., Swan, R., Salgado, R. and Lovell, C.W., (1997), "Pullout Testing of Geogrids in Tire Shreds and Rubber Sand", Testing Soil Mixed with Waste or Recycled Materials, ASTM STP 1275, 109-121.

Karim , A., Salgado, R. and Lovell, C.W., (1997), "Building Embankments of Coal Combustion Fly Ash-Bottom Ash Mixtures", 48th Highway Geology Symposium, Knoxville, TN, May, 66-74.

Korayem, A., Salgado, R., Lovell, C. W. , (1996), "Compaction of Fly and Bottom Ash Mixtures", 51st Industrial Waste Conference, May 6-8, 251-255.

4. Ashmawy, A., Salgado, R., Guha, S., and Drnevich, V. P., (1995), "Soil Damping and its Use in Dynamic Analysis", 3rd International Conference on Recent Advances in Geotechnical Engineering and Soil Dynamics, St. Louis, MO, April, Paper No. 1.13, 35-41.

Bernal , A., Swan, R., Salgado, R. and Lovell, C.W., (1995), "Pullout Testing of Geogrids in Tire Shreds and Rubber Sand", 3rd Annual Great Lakes Geotechnical and Geoenvironmental Conference, Cleveland, OH, May, 219-231.

Salgado, R. , (1995), "Design of Deep Foundations in Sands Based on CPT Results", X Panamerican Conference on Soil Mechanics and Foundation Engineering, Guadalajara, Mexico, November, Vol. 3, 1261-1274.

Bernal , A., Ahmed, I. , Lovell, C.W., and Salgado, R., (1994), "Rubber Sand as Lightweight Geomaterial", X Brazilian Conference of Soil Mechanics and Foundation Engineering, Iguassu Falls, Brazil, November, Vol.3, 1261-1274.

Ghionna, V.N., Jamiolkowski, M., Pedroni, S. and Salgado, R., (1994), "The Tip Displacement of Drilled Shafts in Sands", Settlement '94, Geotechnical Engineering Division, ASCE , Texas A&M University, College Station, TX, June, Vol. 2, 1039-1057.

Salgado, R. and Mitchell, J.K., (1994), "Extra-terrestrial Soil Property Determination by CPT", Eighth International Conference on Computer Methods and Advances in Geomechanics, Morgantown, May 22-28, Vol. 2, 1781-1788.


Books


Salgado, R., (2008), Solutions Manual for the Engineering of Foundations, McGraw-Hill.

Salgado, R., (2008), The Engineering of Foundations, McGraw-Hill.


Chapters in Books


Salgado, R., (2005), "Design of Pile Foundations", The Encyclopedia of Life, UNESCO.

Salgado, R. and Santagata, M., (2002), "In-Situ Tests and Field Instrumentation", The Civil Engineering Handbook, 2nd Ed., Edited by W. F. Chen, 28-1 to 28-3.

Salgado, R., (1995), "In-Situ Tests and Field Instrumentation", The Civil Engineering Handbook, Edited by W. F. Chen, 921-943.


Reports


Han, F., Prezzi, M., Salgado, R., Marashi, M., Wells, T., and Zaheer, M., (2020), "Verification of Bridge Foundation Design Assumptions and Calculations", West Lafayette, IN.

Han, F., Ganju, E., Salgado, R., Prezzi, M., and Zaheer, M., (2019), "Experimental Study of the Load Response of Large Diameter Closed-Ended and Open-Ended Pipe Piles Installed in Alluvial Soil", West Lafayette, IN.

Salgado, R. and Zhang, Y., (2012), "Use of Pile Driving Analysis for Assessment of Axial Load Capacity of Piles", FHWA/IN/JTRP-2012/11. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University.

Salgado, R., Woo, S. and Kim, D., (2011), "Development of Load and Resistance Factor Design for Ultimate and Serviceability Limit States of Transportation Structure Foundations", FHWA/IN/JTRP-2011/03. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University.

Kim, H., Prezzi, M and Salgado, R., (2010), "Use of Dynamic Cone Penetration and Clegg Hammer Tests for Quality Control of Roadway Compaction and Construction", FHWA/IN/JTRP-2010/27. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University.

Basu. P., Salgado, R., Prezzi, M. and Chakraborty, T., (2009), "A Method for Accounting for Pile Setup and Relaxation in Pile Design and Quality Assurance", FHWA/IN/JTRP-2009/24. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University.

Kim, D. W. and Salgado, R., (2009), "Limit States and Load and Ressitance Factor Design of Slopes and Retaining Structures", FHWA/IN/JTRP-2009/xx, Joint Transportation Research Program, Purdue University.

Loukidis, D., Salgado, R. and Abou-Jaoude, G., (2009), "Assessment of Axially Loaded Pile Dynamic Design Methods and Review of INDOT Axially Loaded Pile Dynamic Design Methods", FHWA/IN/JTRP-2009/xx, Joint Transportation Research Program, Purdue University.

Balunaini, U., Yoon, S., Prezzi, M., Salgado, R. and McCullouch, B., (2008), "Design, Planning, and Implementation of Civil Engineering Applications for Tire Shreds", IDEM report for project A305-4-112.

Balunaini, U., Yoon, S., Prezzi, M., Salgado, R. and McCullouch, B., (2008), "Research and Development of More Economical Mixtures of Tire Shreds and Sands", IDEM report for project A305-4-115.

Basu, D., Salgado, R. and Prezzi, M., (2008), "Analysis of Laterally Loaded Piles in Multilayered Soil Deposits", FHWA/IN/JTRP-2007/23, Joint Transportation Research Program, Purdue University.

Kim, K., Prezzi, M. and Salgado. R., (2007), "Interpretation of Cone Penetration Tests in Clayey Soils", FHWA/IN/JTRP-2007/22, Joint Transportation Research Program, Purdue University.

Kim, B., Yoon, S. , Balunaini, U., Prezzi, M. and Salgado, R., (2006), "Determination of Ash Mixture Properties and Construction of Test Embankment - Part A", FHWA/IN/JTRP-2006/24-1, SPR-2591, Joint Transportation Research Program, Purdue University.

Yoon, S. , Balunaini, U., Prezzi, M., Salgado, R. and Siddiki N. Z., (2006), "Determination of Ash Mixture Properties and Construction of Test Embankment - Part B", FHWA/IN/JTRP-2006/24-2, SPR-2591, Joint Transportation Research Program, Purdue University.

Carraro, J. and Salgado, R., (2004), "Mechanical Behavior of Non-Textbook Soils", FHWA/IN/JTRP-2004/05, Joint Transportation Research Program, Purdue University.

Salgado, R. and Yoon, S., (2003), "Construction of Tire Shreds Test Embankment", FHWA/IN/JTRP-2002/35, Joint Transportation Research Program, Purdue University.

Salgado, R. and Yoon, S., (2003), "Dynamic Cone Penetration Test (DCPT) for Subgrade Assessment", FHWA/IN/JTRP-2002/30, Joint Transportation Research Program, Purdue University.

Kim, K., Salgado, R., Lee, J. and Paik, K., (2002), "Load Tests on Pipe Piles for Development of CPT-Based Design Method", FHWA/IN/JYRP-2002/4, SPR-2361, Joint Transportation Research Program, Purdue University.

Kim, K., Salgado, R., Lee, J. and Paik, K., (2002), "Load Tests on Pipe Piles for Development of CPT-Based Design Method", FHWA/IN/JTRP-2002/04, Joint Transportation Research Program, Purdue University.

Salgado, R. and Kim, D., (2002), "Effects of Heavier Truck Loadings and Super-Single Tires on Subgrades", FHWA/IN/JTRP-2002/20, Joint Transportation Research Program, Purdue University.

Bobet, A., Salgado, R., Loukidis, D., (2001), "Seismic Design of Deep Foundations", FHWA/IN/JTRP-2000/22, SPR-2410, Joint Transportation Research Program, Purdue University.

Salgado, R. and Lee, J., (1999), "Pile Design Based on Cone Penetration Test Results", FHWA/IN/JTRP-99/08, SPR-2142, Joint Transportation Research Program, Purdue University.

Luo, X., Salgado, R., Altschaeffl, A, (1998), "Cone Penetration Test to Assess the Mechanical Properties of Subgrade Soils", FHWA/IN/JTRP-98/13, SPR-2133, Joint Transportation Research Program, Purdue University.

Karim, A., Lovell, C., Salgado, R., (1997), "Building Embankments of Fly/Bottom Ash Mixtures", FHWA/IN/JTRP-97/01, SPR-2115, Joint Transportation Research Program, Purdue University.

Bernal, A., Lovell, C., Salgado, R., (1996), "Laboratory Study on the Use of tire Shreds and Rubber-Sand in Backfilled and Reinforced Soil Applications", FHWA/IN/JHRP-96/12, HPR- 2087, Joint Transportation Research Program, Purdue University.

Lee, K., Lovell, C., Salgado, R., (1996), "The Use of Pyrolized Carbon Black as an Additive (Part 3: Air Cooled Furnace Slag)", FHWA/IN/JHRP-96/19, SPR-2096, Joint Transportation Research Program, Purdue University.