Galvis-Castro, A.C., Tovar-Valencia, R.D., Prezzi, M., and Salgado, R., (2023), "Effect of cyclic loading on the mobilization of unit base resistance of model piles jacked in sand", Acta Geotechnica, 1-20. [pdf]

Hu, Q., Han, F., Prezzi, M., Salgado, R., and Zhao, M., (2022), "Finite-Element Analysis of the Lateral Load Response of Monopiles in Layered Sand", Journal of Geotechnical and Geoenvironmental Engineering, 148(4), 04022001. [pdf]

Hu, Q., Han, F., Prezzi, M., Salgado, R., and Zhao, M., (2022), "Lateral load response of large-diameter monopiles in sand", Géotechnique, 72 (12), 1035-1050. [pdf]

Tovar-Valencia, R.D., Galvis-Castro, A., Salgado, R., Prezzi, M., and Fridman, D., (2022), "Experimental measurement of particle crushing around model piles jacked in a calibration chamber", Acta Geotechnica, Online. [pdf]

Hu, Q., Han, F., Prezzi, M., Salgado, R., and Zhao, M., (2021), "Lateral load response of large-diameter monopiles in sand", Géotechnique, 1-16. [pdf]

Tovar-Valencia, R.D., Galvis-Castro, A., Salgado, R. and Prezzi, M., (2021), "Effect of base geometry on the resistance of model piles in sand", Journal of Geotechnical and Geoenvironmental Engineering, 147(3): 04020180. [pdf]

Galvis-Castro, A.C., Tovar-Valencia, R.D., Salgado, R. and Prezzi, M., (2019), "Compressive and Tensile Shaft Resistance of Nondisplacement Piles in Sand", Journal of Geotechnical and Geoenvironmental Engineering, 145(9), 04019041. [pdf]

Han, F., Ganju, E., Salgado, R., and Prezzi, M., (2019), "Comparison of the Load Response of Closed-Ended and Open-Ended Pipe Piles Driven in Gravelly Sand", Acta Geotechnica, 14(6), 1785–1803. [pdf]

Galvis-Castro, A.C., Tovar-Valencia, R.D., Salgado, R. and Prezzi, M., (2018), "Effect of Loading Direction on the Shaft Resistance of Jacked Piles in Dense Sand", Géotechnique, 69(1), 16-28. [pdf]

Tovar-Valencia, R.D., Galvis-Castro, A.C., Prezzi, M. and Salgado, R., (2018), "Short-Term Setup of Jacked Piles in a Calibration Chamber", Journal of Geotechnical and Geoenvironmental Engineering, 144(12), 04018092. [pdf]

Han, F., Prezzi, M., and Salgado, R., (2017), "Energy-based Solutions for Nondisplacement Piles Subjected to Lateral Loads", International Journal of Geomechanics, 17(11), 04017104. [pdf]

Han, F., Salgado, R., Prezzi, M. and Lim, J., (2017), "Shaft and Base Resistance of Non-displacement Piles in Sand", Computers and Geotechnics, 83, 184-197. [pdf]

Passini, L.B., Schnaid, F. and Salgado, R., (2017), "Experimental Study of Shaft Resistance of Model Piles in Fluidized and Nonfluidized Fine Sand", Journal of Offshore Mechanics and Arctic Engineering, 139(5):052001. [pdf]

Salgado, R., Han, F., and Prezzi, M., (2017), "Axial Resistance of Non-displacement Piles and Pile Groups in Sand", Rivista Italiana di Geotecnica, 51(4), 35-46. [pdf]

Tovar-Valencia, R.D., Galvis-Castro, A., Salgado, R. and Prezzi, M., (2017), "Effect of Surface Roughness on the Shaft Resistance of Displacement Model Piles in Sand", Journal of Geotechnical and Geoenvironmental Engineering, 144(3): 04017120. [pdf]

Dai, G., Salgado, R., Gong, W. and Zhu, M., (2016), "The Effect of Sidewall Roughness on the Shaft Resistance of Rock-Socketed Piles", Acta Geotechnica, DOI: 10.1007/s11440-016-0470-8. [pdf]

Han, F., Prezzi, M., Salgado, R. and Zaheer, M., (2016), "Axial Resistance of Closed-Ended Steel-Pipe Piles Driven in Multilayered Soil", Journal of Geotechnical and Geoenvironmental Engineering, DOI: 10.1061/(ASCE)GT.1943-5606.0001589. [pdf]

Tehrani, F.S., Han, F., Salgado, R., Prezzi, M., Tovar, R.D. and Castro, A.G., (2016), "Effect of Surface Roughness on the Shaft Resistance of Non-displacement Piles embedded in Sand", Geotechnique, 1-15. [pdf]

Basu, P., Prezzi, M., Salgado, R. and Chakraborty T., (2015), "Closure to Shaft Resistance and Setup Factors for Piles Jacked in Clay", Journal of Geotechnical and Geoenvironmental Engineering, 141(6). [pdf]

Han, F., Salgado, R., & Prezzi, M., (2015), "Nonlinear analyses of laterally loaded piles–A semi-analytical approach", Computers and Geotechnics, 70, 116-129. [pdf]

Basu, P., Prezzi, M., Salgado, R. and Chakraborty, T. , (2014), "Shaft Resistance and Setup Factors for Piles Jacked in Clays ", Journal of Geotechnical and Geoenvironmental Engineering , 140(3) . [pdf]

Choi, Y.S., Basu, D., Prezzi, M. and Salgado, R., (2014), "Study on Laterally Loaded Piles with Rectangular and Circular Cross Sections", Geomechanics and Geoengineering: An International Journal , 10(2), 139-152. [pdf]

Choi, Y.S., Basu, D., Salgado, R. and Prezzi, M. , (2014), "Response of Laterally Loaded Rectangular and Circular Piles in Soils with Properties Varying with Depth ", Journal of Geotechnical and Geoenvironmental Engineering , 140(4) . [pdf]

Basu, D., Salgado, R. and Prezzi, M., (2013), "A New Framework for Analysis of Laterally Loaded Piles", Journal of Geo-engineering Sciecnes, 1(1), 53-67. [pdf]

Basu, P., Prezzi, M. and Salgado, R. , (2013), "Modeling of Installation and Quantification of Shaft Resistance of Drilled Displacement Piles in Sand ", International Journal of Geomechanics , ASCE (accepted, invited paper) . [pdf]

Lee, J. T., Prezzi, M. and Salgado, R. , (2013), "Influence of Axial Loads on the Lateral Capacity of Instrumented Steel Model Piles ", International Journal of Pavement Research and Technology , 6(2), 80-85 . [pdf]

Salgado, R., Seo, H. and Prezzi, M. , (2013), "Variational Elastic Solution for Axially Loaded Piles in Multilayered Soil ", International Journal for Numerical and Analytical Methods in Geomechanics , 37(4), 423-440 . [pdf]

Bica, A., Prezzi, M., Seo, H., Salgado, R. and Kim, D , (2012), "Instrumentation and Axial Load Testing of Displacement Piles ", Proceedings of the ICE (Institution of Civil Engineers) - Geotechnical Engineering , (accepted) . [pdf]

Basu, P., Loukidis, D., Prezzi, M. and Salgado, R., (2011), "Analysis of Shaft Resistance of Jacked Piles in Sands", International Journal for Numerical and Analytical Methods in Geomechanics, 35(15), 1605-1635. [pdf]

Lee, J., Prezzi, M. and Salgado, R., (2011), "Experimental Investigation of the Combined Load Response of Model Piles Driven in Sand", Geotechnical Testing Journal, ASTM, 34(6), 653-667. [pdf]

Lee, W., Kim, D., Salgado, R. and Zaheer, M., (2010), "Setup of Driven Piles in Layered Soil", Soils and Foundations, JGS, 50(5), 585-598. [pdf]

Basu, D., Salgado, R. and Prezzi, M., (2009), "A Continuum-Based Model for Analysis of Laterally Loaded Piles in Layered Soils", Geotechnique, ICE, 59(2), 127-140. [pdf]

Foye, K.C., Abou-Jaoude, G., Prezzi, M. and Salgado, R., (2009), "Resistance Factors for Use in Load and Resistance Factor Design of Driven Pipe Piles in Sands", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(1), 1-13. [pdf]

Seo, H., Basu, D., Prezzi, M. and Salgado, R., (2009), "Load-Settlement Response of Rectangular and Circular Piles in Multilayered Soils", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(3), 420-430. [pdf]

Basu, D. and Salgado, R., (2008), "Analysis of Laterally Loaded Piles with Rectangular Cross Sections Embedded in Layered Soil", International Journal for Numerical and Analytical Methods in Geomechanics, Wiley, 32(7), 721-744. [pdf]

Basu, D., Prezz, M., Salgado, R. and Chakraborty, T. , (2008), "Settlement Analysis of Piles with Rectangular Cross Sections in Multi-Layered Soils", Computers and Geotechnics, Elsevier, 35(4), 563-575. [pdf]

Loukidis, D. and Salgado, R., (2008), "Analysis of the Shaft Resistance of Non-Displacement Piles in Sand", Geotechnique, ICE, 58(4), 283-296. [pdf]

Basu, D. and Salgado, R., (2007), "Elastic analysis of laterally loaded piles in multi-layered soil", Geomechanics and Geoengineering: An International Journal, Taylor & Francis Group, 2(3), 183-196. [pdf]

Basu, D. and Salgado, R., (2007), "Method of Initial Parameters for Laterally Loaded Piles Embedded in Layered Soils", Geomechanics and Geoengineering: An International Journal, Taylor & Francis Group, 2(4), 281-294. [pdf]

Paik, K. and Salgado, R., (2004), "Closure to Determination of Bearing Capacity of Open-Ended Piles in Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 130(6), 658-660. [pdf]

Lee, J., Salgado, R. and Paik, K., (2003), "Estimation of Load Capacity of Pipe Piles in Sand Based on Cone Penetration Test Results", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(5), 391-403. [pdf]

Paik, K. and Salgado, R., (2003), "Determination of Bearing Capacity of Open-Ended Piles in Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(1), 46-57. [pdf]

Paik, K., Salgado, R. Lee, J and Kim, B. , (2003), "Behavior of Open- and Closed-ended Piles Driven into Sands", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(4), 296-306. [pdf]

Ganju, E., Galvis-Castro, A.C., Janabi, F., Prezzi, M., and Salgado, R., (2021), "Displacements, Strains, and Shear Bands in Deep and Shallow Penetration Processes", Journal of Geotechnical and Geoenvironmental Engineering, 147(11), 04021135. [pdf]

Foye, K.C., Salgado, R. and Scott, B., (2006), "Resistance Factors for Use in Shallow Foundation LRFD", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(9), 1208-1218. [pdf]

Salgado, R. and Kim, D. , (2014), "Reliability Analysis of Load and Resistance Factor Design of Slopes ", Journal of Geotechnical and Geoenvironmental Engineering , 140(1), 57-73 . [pdf]

Foye, K.C., Salgado, R. and Scott, B. , (2006), "Assessment of Variable Uncertainties for Reliability-Based Design of Foundations", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(9), 1197-1207. [pdf]

Salgado, R. and Prezzi, M., (2007), "Computation of Cavity Expansion Pressure and Penetration Resistance in Sands", International Journal of Geomechanics, ASCE, 7(4), 251-265. [pdf]

Galvis-Castro, A.C., Tovar-Valencia, R.D., Prezzi, M., and Salgado, R., (2023), "Effect of cyclic loading on the mobilization of unit base resistance of model piles jacked in sand", Acta Geotechnica, 1-20. [pdf]

Tovar-Valencia, R.D., Galvis-Castro, A., Salgado, R., Prezzi, M., and Fridman, D., (2022), "Experimental measurement of particle crushing around model piles jacked in a calibration chamber", Acta Geotechnica, Online. [pdf]

Sabetamal, H., Salgado, R., Carter, J. P., and Sheng, D., (2021), "A two-surface plasticity model for clay; numerical implementation and applications to large deformation coupled problems of geomechanics", Computers and Geotechnics, 139, 104405. [pdf]

Tovar-Valencia, R.D., Galvis-Castro, A., Salgado, R. and Prezzi, M., (2021), "Effect of base geometry on the resistance of model piles in sand", Journal of Geotechnical and Geoenvironmental Engineering, 147(3): 04020180. [pdf]

Passini, L.B., Schnaid, F. and Salgado, R., (2017), "Experimental Study of Shaft Resistance of Model Piles in Fluidized and Nonfluidized Fine Sand", Journal of Offshore Mechanics and Arctic Engineering, 139(5):052001. [pdf]

Tang, D., Ganju, E., Rahman, S., Li, D., Prezzi, M. and Salgado, R., (2017), "On Modelling the Compressibility of Unsaturated Fine-grained Soils", Soils and Foundations, (in press). [pdf]

Tovar-Valencia, R.D., Galvis-Castro, A., Salgado, R. and Prezzi, M., (2017), "Effect of Surface Roughness on the Shaft Resistance of Displacement Model Piles in Sand", Journal of Geotechnical and Geoenvironmental Engineering, 144(3): 04017120. [pdf]

Woo, S. I. and Salgado, R. , (2015), "Bounding Surface Modeling of Sand with Consideration of Fabric and Its Evolution During Monotonic Shearing ", International Journal of Solids and Structures , 63, 277-288. [pdf]

Basu, P., Prezzi, M. and Salgado, R. , (2013), "Modeling of Installation and Quantification of Shaft Resistance of Drilled Displacement Piles in Sand ", International Journal of Geomechanics , ASCE (accepted, invited paper) . [pdf]

Chakraborty, T., Salgado, R. and Loukidis, D. , (2013), "A Two-Surface Plasticity Model for Clay ", Computers and Geotechnics , 49, 170-190 . [pdf]

Lee, J. T., Prezzi, M. and Salgado, R. , (2013), "Influence of Axial Loads on the Lateral Capacity of Instrumented Steel Model Piles ", International Journal of Pavement Research and Technology , 6(2), 80-85 . [pdf]

Zhao, X., Salgado, R. and Prezzi, M. , (2012), "Centrifuge Modeling of Combined Anchors for Slope Stability ", Proceedings of the ICE (Institution of Civil Engineers) - Geotechnical Engineering , 167(GE4), 357-370 . [pdf]

Lee, J., Prezzi, M. and Salgado, R., (2011), "Experimental Investigation of the Combined Load Response of Model Piles Driven in Sand", Geotechnical Testing Journal, ASTM, 34(6), 653-667. [pdf]

Basu, D., Salgado, R. and Prezzi, M., (2009), "A Continuum-Based Model for Analysis of Laterally Loaded Piles in Layered Soils", Geotechnique, ICE, 59(2), 127-140. [pdf]

Loukidis, D. and Salgado, R., (2009), "Modeling Sand Response Using Two-Surface Plasticity", Computers and Geotechnics, Elsevier, 36(1-2), 166-186. [pdf]

Lee, K., Cho, J., Salgado, R. and Lee, I., (2001), "Retaining Wall Model Test with Foundry Sand Mixture Backfill", Geotechnical Testing Journal, ASTM, 24(4), 401-408. [pdf]

Carraro, J.A.H., Bandini, P. and Salgado, R., (2003), "Liquefaction Resistance of Clean and Nonplastic Silty Sands Based on Cone Penetration Resistance", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(11), 965-976. [pdf]

Salgado, R., Jamiolkowski, M. and Mitchell, J.K., (1998), "Penetration Resistance in Sands: Analysis and Applications to Liquefaction Potential Assessment and Estimation of Pile Base Resistance", Rivista Italiana di Geotecnica, AGI, XXXII(4), 5-17. [pdf]

Salgado, R., Boulanger, R.W. and Mitchell, J.K., (1997), "Lateral Stress Effects on CPT Liquefaction Resistance Correlations", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(8), 726-735. [pdf]

Kang, F., Han, S., Salgado, R. and Li, J. , (2015), "System Probabilistic Stability Analysis of Soil Slopes Using Gaussian Process Regression with Latin Hypercube Sampling ", Computers and Geotechnics , 63, 13-25 . [pdf]

Salgado, R. and Kim, D. , (2014), "Reliability Analysis of Load and Resistance Factor Design of Slopes ", Journal of Geotechnical and Geoenvironmental Engineering , 140(1), 57-73 . [pdf]

Zhao, X., Salgado, R. and Prezzi, M. , (2012), "Centrifuge Modeling of Combined Anchors for Slope Stability ", Proceedings of the ICE (Institution of Civil Engineers) - Geotechnical Engineering , 167(GE4), 357-370 . [pdf]

Loukidis, D., Bandini, P. and Salgado, R. , (2003), "Stability of Seismically Loaded Slopes using Limit Analysis", Geotechnique, ICE, 53(5), 463-479. [pdf]

Kim, J., Salgado, R. and Lee, J., (2002), "Stability Analysis of Complex Soil Slopes using Limit Analysis ", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 128(7), 546-557. [pdf]

Kim, J., Salgado, R. and Yu, H.S., (1999), "Limit Analysis of Soil Slopes Subjected to Pore-Water Pressures", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(1), 49-58. [pdf]

Yu, H.S., Salgado, R., Sloan, S. and Kim, J., (1999), "Closure to Limit Analysis versus Limit Equilibrium for Slope Stability", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(10), 915-918. [pdf]

Yu, H.S., Salgado, R., Sloan, S.W. and Kim, J.M., (1998), "Limit Analysis versus Limit Equilibrium for Slope Stability", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 124(1), 1-11. [pdf]

Paik, K.H. and Salgado, R., (2005), "Erratum: Estimation of Active Earth Pressure against Rigid Retaining Walls Considering Arching Effects", Geotechnique, 55(4), 342. [pdf]

Paik, K.H. and Salgado, R., (2003), "Estimation of Active Earth Pressure Against Rigid Retaining Walls Considering Arching Effects", Geotechnique, ICE, 53(7), 643-653 . [pdf]

Lee, K., Cho, J., Salgado, R. and Lee, I., (2001), "Retaining Wall Model Test with Foundry Sand Mixture Backfill", Geotechnical Testing Journal, ASTM, 24(4), 401-408. [pdf]

Hu, Q., Han, F., Prezzi, M., Salgado, R., and Zhao, M., (2022), "Finite-Element Analysis of the Lateral Load Response of Monopiles in Layered Sand", Journal of Geotechnical and Geoenvironmental Engineering, 148(4), 04022001. [pdf]

Loukidis, D. and Salgado, R., (2009), "Bearing Capacity of Strip and Circular Footings in Sand Using Finite Elements", Computers and Geotechnics, Elsevier, 36(5), 871-879. [pdf]

Lee, J., Salgado, R. and Kim, S., (2005), "Bearing Capacity of Circular Footings under Surcharge using State-Dependent Finite Element Analysis", Computers and Geotechnics, Elsevier, 32(6), 445-457. [pdf]

Loukidis, D., Bandini, P. and Salgado, R. , (2003), "Stability of Seismically Loaded Slopes using Limit Analysis", Geotechnique, ICE, 53(5), 463-479. [pdf]

Kim, J., Salgado, R. and Lee, J., (2002), "Stability Analysis of Complex Soil Slopes using Limit Analysis ", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 128(7), 546-557. [pdf]

Kim, J., Salgado, R. and Yu, H.S., (1999), "Limit Analysis of Soil Slopes Subjected to Pore-Water Pressures", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(1), 49-58. [pdf]

Yu, H.S., Salgado, R., Sloan, S. and Kim, J., (1999), "Closure to Limit Analysis versus Limit Equilibrium for Slope Stability", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(10), 915-918. [pdf]

Yu, H.S., Salgado, R., Sloan, S.W. and Kim, J.M., (1998), "Limit Analysis versus Limit Equilibrium for Slope Stability", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 124(1), 1-11. [pdf]